If you are not restore designing of PIC Controller PCB Board yourself, be sure to allow plenty of time to carefully check the printed circuit board person’s design. At this point, a small prevention is worth a hundred times the remedy. Don’t expect the designer to understand what you think.
Your opinion and guidance for Restoring PIC Controller PCB Board Design are the most important in the early stages of the wiring design process.
Your opinion and guidance for Restoring PIC Controller PCB Board Design are the most important in the early stages of the wiring design process. The more information you can provide, and the more you intervene throughout the routing process, the better the resulting PIC Controller PCB Board Design will be.
Set a tentative completion point for the wiring design engineer-quick check according to the wiring progress report you want. This “closed loop” method which also be viewed as rules of reverse engineering PCB layout can prevent going astray, thereby minimizing the possibility of rework and optimizing PCB layout through reverse engineer.
The instructions that need to be given to the wiring engineer include: a short description of the circuit function, a PCB schematic drawing indicating the input and output locations, PCB stacking information (for example, how thick the board is, how many layers there are, and detailed information about each signal layer and ground plane-function Power consumption, ground wire, analog signal, digital signal and RF signal);
