Reverse Engineering Circuit Board Documents Inputting Phase will follow below points:
1. Whether the information received in the pcb board cloning process is complete (including: schematic diagram, *.pcb file, bill of materials, PCB design description and PCB design or change requirements, standardization requirements description, process design description document)
2. Make sure the PCB template is up to date;
3. Confirm that the positioning device position of the template is correct;
4. Whether the PCB reverse engineering description and the Reverse Engineering Circuit Board Documents or change requirements and standardization requirements are clear;
Reverse Engineering Circuit Board Documents Inputting Phase
5. Confirm that the prohibited placement of devices and wiring areas on the outline drawing have been reflected on the PCB template;
6. Compare the outline drawings to confirm that the dimensions and tolerances marked on the PCB are correct, and that the metallized holes and non-metallized holes are accurately defined;
7. After confirming that the PCB template is accurate, it is best to lock the structure file to avoid misoperation from being moved.
